Zigbee Touch Hum-free Fan Regulator

Features

  • Wireless and Manual Control for Inductive or Resistive Load Type
  • Hum-free Capacitive 4-step Speed Control
  • From Switch Control for Without App Control
  • Schedule/Alarm based Automatic Control
  • Cloud Connected
  • Secure Access
  • Easy Setup
  • Works with Android & iOS User Applications

Applications

  • Supports control of up to 200 W per circuit.
  • Has in-built Zigbee and acts as a repeater for Zigbee Mesh Network.
  • Retains state of the fan speed even during a power cut and is able to load the state under 10 ms on resumption of power.
  • Can be accessed in dual mode – local only through the same WiFi network as well as through cloud from anywhere in the world for seamless connectivity using Android and iOS Application.
  • Supports ease All On/Off Mode for conveniently turning Fan on/off while entering and exiting the room.
  • Supports unlimited (limited by mobile device memory) mood/scene/favorite profile setting through one click
  • Supports up to 8 schedules/alarms on devices on and off for automatic device control.
  • Supports renaming device names individually on each mobile/user device.
  • Supports change of settings through cloud from anywhere in the world.

Accessories

Configuration

  • Please check NUOS Zigbee Gateway configuration for setting up and configuring the gateway.
  • Push the NUOS Touch Hum-free Fan Regulator inside the switch plate till it snap fits.
  • Connect the Red Wire from behind the switch to the Line/Live wire of the electrical circuit.
  • Connect the Black Wire from behind the switch to the Neutral wire of the electrical circuit.
  • Connect the Yellow Wire to the Fan to be driven by the regulator.
  • Make sure the wiring connections are tightly secured by insulation/electrical tape to above lose connections and arcing behind switchboard.
  • Close the switch board once the wiring is completed.
  • New switches and sensors automatically associate with the gateway on power-up and can be added in the desired room using the user application.
  • Please refer to the installation manual for detailed process with images.

Specifications

Dimensions: 45 mm x 48 mm x 45 mm
Weight: 150 g
Networking Interface: Built in 2.4 GHz Zigbee variants available
Buttons: 2 Touch Buttons for controlling fan speed up/down
Power Method: Drives up to 200 W of Fan
Power Supply: 85 – 265 V AC, 50 – 60 Hz, 1ph
PoE: N/A
Maximum TX Power 2.4 GHz: +/- 1.5dBm
Antennas 2.4 GHz: Internal PCB Antenna
Wi-Fi Standards: In-built WiFi supports 2.4GHz IEEE 802.11b/g/n Standard
Wireless Security: Supports AES 128-bit Encryption
Data Rate: Supports wireless data rates of up to 250 kbitps
Mounting: Snaps into switch plate
Operating Temperature: -20 to +60°C
Operating Humidity: 95%
Certifications: RoHS, CE Class A Compliance (Self Declaration)