
Zigbee Lux Sensor
Features
- Wireless & Retrofit
- Measures Light Intensity of Ambient Light in Lux
- Cloud Connected with In-App Visualisation and Analytics
- Easy Setup
- Works with Android & iOS User Applications
Applications
- This sensor has light-to-digital converters that transform light intensity to a digital signal output measured in lux
which is derived using an empirical formula to approximate the human eye response. - This highly integrated sensor combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution).
- The sensor data is communicated over Zigbee to the NUOS Zigbee Gateway and the appropriate actions based on the Safety Mode (triggering safety alert SMS & In-app Notification) are triggered by the Gateway if the mode is
enabled. - Has in-built Zigbee and acts also as a repeater for Zigbee Mesh Network.
- Can be accessed in dual mode – local only through the same WiFi network as well as through cloud from anywhere in the world for seamless connectivity using Android and iOS Application.
- Supports ease Safety Mode Enable/Disable from mobile application.
- Support IFTTT for taking action based on certain triggers
- Supports change of settings through cloud from anywhere in the world.
Accessories
- Please check NUOS Zigbee Gateway configuration for setting up and configuring the gateway.
- Push the NUOS Sensor inside the switch plate till it snap fits.
- Connect the Red Wire from behind the sensor to the Line/Live wire of the electrical circuit.
- Connect the Black Wire from behind the sensor to the Neutral wire of the electrical circuit.
- Make sure the wiring connections are tightly secured by insulation/electrical tape to above lose connections and arcing behind switchboard.
- Close the switch board once the wiring is completed.
- New switches and sensors automatically associate with the gateway on power-up and can be added in the desired room using the user application.
- Please refer to the installation manual for detailed process with images.
Configuration
- Please check NUOS Zigbee Gateway configuration for setting up and configuring the gateway.
- Push the NUOS Sensor inside the switch plate till it snap fits.
- Connect the Red Wire from behind the sensor to the Line/Live wire of the electrical circuit.
- Connect the Black Wire from behind the sensor to the Neutral wire of the electrical circuit.
- Make sure the wiring connections are tightly secured by insulation/electrical tape to above lose connections and arcing behind switchboard.
- Close the switch board once the wiring is completed.
- New switches and sensors automatically associate with the gateway on power-up and can be added in the desired room using the user application.
- Please refer to the installation manual for detailed process with images.
Specifications
Dimensions: 54 mm x 48 mm x 45 mm
Weight: 100 g
Networking Interface: Built in 2.4 GHz Zigbee variants available
Output Range: 0 – 4000 Lux
Operating Temperature: 5°C to 50°C
Storage Temperature: -40 to 85°C
Relative Humidity: 60% maximum
Power Consumption: 50 mW
Power Supply: 85 – 265 V AC, 50 – 60 Hz, 1ph
PoE: N/A
Maximum TX Power 2.4 GHz: +/- 1.5dBm
Antennas 2.4 GHz: Internal PCB Antenna
Wireless Security: Supports AES 128-bit Encryption
Data Rate: Supports wireless data rates of up to 250 kbitps
Mounting: Snaps into switch plate
Certifications: RoHS, CE Class A Compliance (Self Declaration)